2002 BMW 5_Series Radio / Car Audio Installation Guide
I want to replace my factory radio
The parts in this section is what is typically required for proper car audio / stereo installation of most all replacement radios. Most car audio / stereo installation kit can mount Shaft or Single Din (standard size) replacement radios / car stereos.
The model SNI-35 is used to add an amplifier to a stereo which has speaker level outputs, perfect for your next car audio / stereo installation
SNI-35 adjusts the signal from 2 to 40 watts per channel. Signals below 20Hz cutoff. Linear from 20-20,000Hz at +/- 5 dB, while maintaining signal phase. Isolates input and output circuits to prevent ground loop noise. Perfect when adding an amplifier to a factory or aftermarket radio. Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set.
LN-60 Line Output Converter
Price $ 14.88
High Level to RCA Level Adapter
Converts High Level Speaker Output to RCA. Line Level/Adjustable Level Control. Sleek Black Color. Allows the Easy Installation of EQ's & Amplifiers to Systems with No RCA Outputs
Factory Parts & Accessories
If your vehicle has Steering Wheel controls and you would like to replace your radio with a new one, and still be able to use some of the functions on the steering wheel.
Amplifier Tips
SNI-1 Noise Filter
Price $ 19.95
The model SNI-1 is used to remove noise from an amplifier outputs. Perfect for your next car audio / stereo installation
*kit and harnesses may be substituted by another manufacture if Metra product is not in stock
Tune-Town Car Audio
2345 E Perkins Ave
Sandusky, Ohio 44870
419-627-0065
Installation
Service
Sales
Support
Tune-Town is a registered Trademark All Rights Reserved. Some information published has been provided by manufacture's Tune-Town recognizes all trademarks and or trade names herein and disclaims any proprietary interest in their use.