Tune-Town Car Audio

 1983-87 Cadillac Eldorado Installation Kit & Accessories for your next car audio / stereo install! Do your next car audio installation yourself!

  Home View Cart Contact Us Support

Car Stereo Installation

 

Additional Options
 

  1983-87 Cadillac Eldorado Radio / Car Audio Installation Guide

 

 I want to replace my factory radio

 
 The parts in this section is what is typically required for proper car audio / stereo installation of most all replacement radios. Most car audio / stereo installation kit can mount Shaft or Single Din (standard size) replacement radios / car stereos.
 
View 454416771x125
Cadillac Car Stereo Installation Kit Includes:
  • Faceplate
  • Wire Harness
*Faceplate shown is most popular choice
Click image to view large
View Available Faceplate(s)
View 454416771x125View 454416771x125
View 450016771x126View 450016771x126
View 470016771x127View 470016771x127
Choose Faceplate
Price $
  Faceplate Options
 
View MET994544View MET994544
View MET994500View MET994500
View MET994700View MET994700
Choose Faceplate
Price $
All available faceplate(s) will work perfect for your next car audio / stereo / radio installation, its just a matter of which look you like better!
  Wire Harness
 Harness has every wire clearly marked for easy installation, all wires not used should be properly terminated
Price $ 9.99
This wire harness will easily wire, matched wire colors, to your aftermarket deck. Making your next car audio / stereo installation a breeze!
  No Antenna Adapter currently available
 
 
 

 I want to replace my factory speakers

 
 The parts in this section is what is typically required for proper speaker installation of most all replacement speakers.
 How do speakers work?
 Speaker Harness
Speaker Harness (Pair)
Price $ 9.99
Speaker Harness allows changing speakers with out cutting any wires. Great for car audio / stereo installations in lease vehicles
 
 
 
 I have a "PREMIUM SOUND RADIO" and I would like to install a new radio.
 OEM-1
OEM-1 Kit
Select radio type
OEM-1 Kit
Price $ 80.00
 
 These kit are designed to plug directly into your new radio* and your cars factory harness with out making any crimps, soldering or taping wires together. It is as easy as plugging a lamp in. No kidding if you can plug a house lamp in you can wire your new radio. All you need to do is plug the two supplied cords into the OEM1 then plug the one end marked radio into your new CD or Cassette player, and plug the other end into the cord that was plugged into the back of your factory radio and your done. These also work great on factory premium systems that tend to pop when turned on and off. Installation time approximately two minutes, after factory radio has been removed. * Must have radio from named manufacturer and pin quantity or connections will be required
 These are sold as complete kit with everything you'll need
 
 
 I want to 'Add an amplifier' to my factory radio
 OEM-1
OEM-1 Kit
Price $ 80.00
 
 
 These kit are designed to plug directly in between your factory radio and factory harness with out making any crimps, soldering or taping wires together. The adjustable OEM 1 (supplied) will have front and rear stereo outputs (RCA'S) allowing up to two amplifiers to be added. The OEM 1 will also have an output for the amplifier turn on lead. Installation time approximately two minutes after factory radio has been removed
  
  Line Output Converters
 PAC SNI-35
SNI-35 Line Output Converter
Price $ 29.95
The model SNI-35 is used to add an amplifier to a stereo which has speaker level outputs, perfect for your next car audio / stereo installation
 
 SNI-35 adjusts the signal from 2 to 40 watts per channel. Signals below 20Hz cutoff. Linear from 20-20,000Hz at +/- 5 dB, while maintaining signal phase. Isolates input and output circuits to prevent ground loop noise. Perfect when adding an amplifier to a factory or aftermarket radio. Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set.
 LN-60
LN-60 Line Output Converter
Price $ 14.88
High Level to RCA Level Adapter
 
 Converts High Level Speaker Output to RCA. Line Level/Adjustable Level Control. Sleek Black Color. Allows the Easy Installation of EQ's & Amplifiers to Systems with No RCA Outputs
 
  Factory Parts & Accessories
 OEM Wire Harness
OEM Harness
Price $ 14.88
Factory Harness will plug into the radio that came in the car when it was new
 
 
 If your vehicle has Steering Wheel controls and you would like to replace your radio with a new one, and still be able to use some of the functions on the steering wheel.
 
  Amplifier Tips
 PAC SNI-1
SNI-1 Noise Filter
Price $ 19.95
The model SNI-1 is used to remove noise from an amplifier outputs. Perfect for your next car audio / stereo installation
 
*kit and harnesses may be substituted by another manufacture if Metra product is not in stock
Tune-Town Car Audio2345 E Perkins AveSandusky, Ohio 44870419-627-0065
InstallationServiceSalesSupport
Tune-Town is a registered Trademark All Rights Reserved. Some information published has been provided by manufacture's Tune-Town recognizes all trademarks and or trade names herein and disclaims any proprietary interest in their use.
Copyright Tune-Town© Car Audio 1998-2022