1973-87
Chevrolet Blazer_(Full_Size) Installation Kit & Accessories
for your next car audio / stereo install! Do your next
car audio installation yourself!
1973-87 Chevrolet Blazer_(Full_Size) Radio /
Car Audio Installation Guide
I
want to replace my factory radio
The parts in
this section is what is typically required
for proper car audio / stereo installation
of most all replacement radios. Most
car audio / stereo installation kit
can mount Shaft or Single Din (standard
size) replacement radios / car stereos.
Speaker
Harness allows changing speakers with out cutting
any wires. Great for car audio / stereo installations
in lease vehicles
I
have a "PREMIUM SOUND RADIO" and I would like
to install a new radio.
OEM-1 Kit
Select radio
type
OEM-1 Kit
Price $
80.00
These kit are
designed to plug directly into your
new radio* and your cars factory harness
with out making any crimps, soldering
or taping wires together. It is as easy
as plugging a lamp in. No kidding if
you can plug a house lamp in you can
wire your new radio. All you need to
do is plug the two supplied cords into
the OEM1 then plug the one end marked
radio into your new CD or Cassette player,
and plug the other end into the cord
that was plugged into the back of your
factory radio and your done. These also
work great on factory premium systems
that tend to pop when turned on and
off. Installation time approximately
two minutes, after factory radio has
been removed. * Must have radio from
named manufacturer and pin quantity
or connections will be required
These are sold as complete kit with everything
you'll need
I
want to 'Add an amplifier' to my factory radio
OEM-1 Kit
Price $
80.00
These kit are
designed to plug directly in between
your factory radio and factory harness
with out making any crimps, soldering
or taping wires together. The adjustable
OEM 1 (supplied) will have front and
rear stereo outputs (RCA'S) allowing
up to two amplifiers to be added. The
OEM 1 will also have an output for the
amplifier turn on lead. Installation
time approximately two minutes after
factory radio has been removed
Line Output Converters
SNI-35 Line
Output Converter
Price $
29.95
The model
SNI-35 is used to add an amplifier to a stereo
which has speaker level outputs, perfect for
your next car audio / stereo installation
SNI-35 adjusts
the signal from 2 to 40 watts per channel.
Signals below 20Hz cutoff. Linear from
20-20,000Hz at +/- 5 dB, while maintaining
signal phase. Isolates input and output
circuits to prevent ground loop noise.
Perfect when adding an amplifier to
a factory or aftermarket radio. Great
for getting an additional set of pre-amps
outputs from a head unit equipped with
only one set.
LN-60 Line Output
Converter
Price $
14.88
High Level
to RCA Level Adapter
Converts High
Level Speaker Output to RCA. Line Level/Adjustable
Level Control. Sleek Black Color. Allows
the Easy Installation of EQ's & Amplifiers
to Systems with No RCA Outputs
Factory Parts & Accessories
OEM Harness
Price $
14.88
Factory
Harness will plug into the radio that came in
the car when it was new
If your vehicle
has
Steering Wheel controls and
you would like to replace your radio
with a new one, and still be able to
use some of the functions on the steering
wheel.
Amplifier Tips
SNI-1 Noise
Filter
Price $
19.95
The model
SNI-1 is used to remove noise from an amplifier
outputs. Perfect for your next car audio / stereo
installation
*kit and harnesses may be substituted by another
manufacture if Metra product is not in stock
Tune-Town Car Audio
2345 E Perkins Ave
Sandusky, Ohio 44870
419-627-0065
Installation
Service
Sales
Support
Tune-Town is a registered Trademark All Rights Reserved.
Tune-Town cannot be responsible for errors published
online. Some information published has been provided
by manufacture's and or corporations. Tune-Town tries
to maintain accuracy. Tune-Town recognizes all Manufacturers
trademarks and or trade names herein and disclaims any
proprietary interest in their use.