1973-87
Chevrolet Suburban Installation Kit & Accessories for
your next car audio / stereo install! Do your next car
audio installation yourself!
|
|
|
1973-87 Chevrolet Suburban Radio / Car Audio
Installation Guide
|
|
I
want to replace my factory radio
|
|
|
The parts in
this section is what is typically required
for proper car audio / stereo installation
of most all replacement radios. Most
car audio / stereo installation kit
can mount Shaft or Single Din (standard
size) replacement radios / car stereos. |
|
|
|
Chevrolet
Car Stereo Installation Kit
Includes: |
|
*Faceplate shown is most popular
choice |
|
|
View Available
Faceplate(s) |
|
|
|
|
|
|
All available faceplate(s)
will work perfect for your next car audio /
stereo / radio installation, its just a matter
of which look you like better! |
|
|
|
This wire
harness will easily wire, matched wire colors,
to your aftermarket deck. Making your next car
audio / stereo installation a breeze! |
|
No
Antenna Adapter currently available |
|
I
want to replace my factory speakers
|
|
|
The parts in
this section is what is typically required
for proper speaker installation of most
all replacement speakers.
|
|
How do speakers work? |
|
|
|
|
Speaker
Harness allows changing speakers with out cutting
any wires. Great for car audio / stereo installations
in lease vehicles |
|
I
have a "PREMIUM SOUND RADIO" and I would like
to install a new radio.
|
|
|
These kit are
designed to plug directly into your
new radio* and your cars factory harness
with out making any crimps, soldering
or taping wires together. It is as easy
as plugging a lamp in. No kidding if
you can plug a house lamp in you can
wire your new radio. All you need to
do is plug the two supplied cords into
the OEM1 then plug the one end marked
radio into your new CD or Cassette player,
and plug the other end into the cord
that was plugged into the back of your
factory radio and your done. These also
work great on factory premium systems
that tend to pop when turned on and
off. Installation time approximately
two minutes, after factory radio has
been removed. * Must have radio from
named manufacturer and pin quantity
or connections will be required |
|
|
These are sold as complete kit with everything
you'll need |
|
I
want to 'Add an amplifier' to my factory radio
|
|
|
These kit are
designed to plug directly in between
your factory radio and factory harness
with out making any crimps, soldering
or taping wires together. The adjustable
OEM 1 (supplied) will have front and
rear stereo outputs (RCA'S) allowing
up to two amplifiers to be added. The
OEM 1 will also have an output for the
amplifier turn on lead. Installation
time approximately two minutes after
factory radio has been removed |
|
|
|
|
The model
SNI-35 is used to add an amplifier to a stereo
which has speaker level outputs, perfect for
your next car audio / stereo installation |
|
|
SNI-35 adjusts
the signal from 2 to 40 watts per channel.
Signals below 20Hz cutoff. Linear from
20-20,000Hz at +/- 5 dB, while maintaining
signal phase. Isolates input and output
circuits to prevent ground loop noise.
Perfect when adding an amplifier to
a factory or aftermarket radio. Great
for getting an additional set of pre-amps
outputs from a head unit equipped with
only one set. |
|
|
|
|
High Level
to RCA Level Adapter |
|
|
Converts High
Level Speaker Output to RCA. Line Level/Adjustable
Level Control. Sleek Black Color. Allows
the Easy Installation of EQ's & Amplifiers
to Systems with No RCA Outputs |
|
|
Factory Parts & Accessories |
|
|
|
Factory
Harness will plug into the radio that came in
the car when it was new |
|
|
If your vehicle
has
Steering Wheel controls and
you would like to replace your radio
with a new one, and still be able to
use some of the functions on the steering
wheel. |
|
|
|
|
The model
SNI-1 is used to remove noise from an amplifier
outputs. Perfect for your next car audio / stereo
installation |
|
*kit and harnesses may be substituted by another
manufacture if Metra product is not in stock |
|
Tune-Town Car Audio |
2345 E Perkins Ave |
Sandusky, Ohio 44870 |
419-627-0065 |
Installation |
Service |
Sales |
Support |
Tune-Town is a registered Trademark All Rights Reserved.
Tune-Town cannot be responsible for errors published
online. Some information published has been provided
by manufacture's and or corporations. Tune-Town tries
to maintain accuracy. Tune-Town recognizes all Manufacturers
trademarks and or trade names herein and disclaims any
proprietary interest in their use. |
|
Copyright Tune-Town© Car Audio 1994-2018 |
|
|
|
|
|
|
|