carry a large selection of faceplates, wire harnesses, antenna adapters,
wiring diagrams / technical help and PAC aftermarket car audio
| || PAC SNI-1 Ground Loop Isolator|
The Model SNI-1 is plugged into the head unit (pre-amp stereo) or equalizer to isolate the equipment located in the dash area from amplifiers, crossovers, etc. that are located elsewhere in the vehicle. This isolation stops ground loop vehicle noise.
- Specially designed and manufactured transformers are used to provide the highest sound quality. In addition, a 1.3 db gain is built-in when the male RCA cable is plugged into or toward the head unit. (If mounted in the opposite direction a 1.3 db loss is incurred.)
- Adapts floating or balanced output to common ground. The isolation that adapts floating or balanced output to common ground may be done at high or speaker level as well (RCA to wire adaptors must be rigged).
- Gold plated RCA recepticles are used and RCA cables with gold plated connectors are used for ease of installation. If the cables were not used the installation would require an addtional short set of RCA male to male cables. Brown ground wires are included for those head units that must see direct ground to function properly.
- Every unit is completely quality inspected as a part of our manufacturing process.
|Price $ 9.99|
|Tune-Town Car Audio
||2018 E Perkins Ave
||Sandusky, Ohio 44870
is a registered Trademark All Rights Reserved. Tune-Town cannot be
responsible for errors published online. Some information published
has been provided by manufacture's and or corporations. Tune-Town
tries to maintain accuracy. Tune-Town recognizes all manufacture's
trademarks and or trade names herein and disclaims any proprietary
interest in their use.
|Copyright Tune-Town© Car Audio 1998-2004|